Magewell Pro Convert for NDI to SDI

Use the Magewell Pro Convert for NDI to SDI Decoder to convert an NDI stream with embedded audio to an SDI output signal. This converter supports resolutions up to 2K60 via NDI input and decodes at resolutions up to 1080p60 for 3G-SDI output. Designed to connect equipment to IP-based media networks, this component supports full bandwidth NDI and high-efficiency NDI|HX modes up to NDI|HX3. Supported streaming protocols include SRT, RTSP, RTMP, UDP, RTP, HLS and HTTP.

Configurable Web UI

The Pro Convert Web UI is compatible with a wide range of web browsers and allows web configuration for settings such as the device name, source name, NDI and EDID designations, and other settings.

Decoding functions

Decodes NDI streams up to 2K60 including NDI, NDI|HX3 and NDI 4.5

Up to 1080p60 3G-SDI output signals

Supports YUV BT.601 and YUV BT.709 color

16-bit, 8-channel audio streams

Supports AAC/MP3 audio decoders

Compatible with H.264/H.265 streams in additional protocols including RTSP, HTTP, HLS, RTMP Pull/Push and MPEG-TS over UDP/SRT/RTP

Supported web browsers

Microsoft Internet Explorer 11

Microsoft Edge

Mozilla Firefox version 61 and higher

Google Chrome version 49 and higher

Apple Safari 11.1 and higher

Opera 55.0.2994.44 and higher

Network interfaces/PoE

10/100/1000 Mb/s Ethernet

Can be powered via the included USB power adapter or via PoE via the RJ45 port

Controls

Menu and selection buttons

16-position rotary DIP switch: set the board index from 0 to F

Includes a 1/4"-20 mounting thread