Magewell Pro Convert HDMI Plus
Convert HDMI video to an NDI stream with the Magewell Pro Convert HDMI Plus video signal converter. Pro Convert has one HDMI input and one HDMI loop-through output with eight channels of embedded audio and supports HDMI input up to DCI 4K 4096 x 2160 at 60 fps. The RJ45 Gigabit Ethernet port supports encrypted NDI output up to 2048 x 2160 8-bit 4:2:2 at 120 fps.
HDMI loopthrough allows you to view your input on a monitor, while your NDI-encoded stream can be sent via Ethernet to various NDI-compatible encoding or streaming applications, such as OBS, XSplit, vMix, Wirecast and others. The mini-DIN-8 tally/PTZ port provides tally input for relaying and for use with the device status LEDs. The LEDs also indicate power, output and input signal status.
The unit is powered by a 5V power adapter connected to the USB 2.0 Type-B port or via PoE (Power over Ethernet) via the RJ45 port. The Pro Convert can be managed with a web UI to configure settings and perform firmware updates via the USB port. A 1/4"-20 mounting thread allows you to mount the device in a rack, bracket or on a stand. The Pro Convert comes with a USB cable, a 5V power adapter, a mini DIN-8 cable and an L-bracket for mounting.
Main functions
One HDMI input, one HDMI loop-through output with integrated audio
Convert one HDMI signal with 8 channels of embedded audio to an NDI stream
Supports up to 4K60 input
Supports up to 2048 x 2160 8-bit 4:2:2 at 120 fps NDI encoding output
USB 2.0 Type-B 5V power supply and PoE via RJ45 port
Mini DIN-8 PTZ/Tally port
Support for NDI 3.x
Support for 8-channel IEC60958 audio streams
Support extraction of audio formation information and channel status data
Support for extracting video timing information
Support for extraction of 3D format information
Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode
297 MHz HDMI receiver
Adaptive HDMI equalizer
Support for custom EDID
Support for extracting AVI/audio InfoFrames
Video processing functions
Adjust video brightness, contrast, saturation and hue
Video deinterlacing
Top field only
Bottom field only
Video aspect ratio conversion
Automatic or manual selection of output aspect ratio
Video color format conversion
Automatic or manual selection of input format and signal processing
Automatic or manual selection of output format, signal processing and saturation range
Support RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats
Support YUV BT.601, YUV BT.709, YUV BT.2020 color output formats
Support for limited or full signal processing
Support for limited, full and 'Extended gamut' saturation ranges
Video frame rate conversion
Mirror video
NDI source name
Support setting the device name displayed in the system via Web UI. By default, the device name is 'Pro Convert'.
Support setting the resource name displayed in the system via the Web UI. By default, the source name is 'board index + serial number'.
Support for setting board index, from 0 to F, via the built-in rotary switch
Status LEDs
The status of the power supply: on/off
Tally: preview/program
The input signal status: locked/unlocked
The status of the loop-through signal: loop-through connected and signal detected/undetected
Supported software
The following software has been successfully tested with the Pro Convert HDMI:
OBS
XSplit
vMix
VidBlasterX
Wirecast
streamstar SW
mimoLive
NewTek NDI compatible encoding or streaming software
Supported web browsers
The following web browsers have been successfully tested with the Pro Convert Web UI:
Microsoft Internet Explorer 11
Microsoft Edge
Mozilla Firefox version 61 and higher
Google Chrome version 49 and higher
Apple Safari 11.1 and higher
Opera 55.0.2994.44 and higher
Magewell Pro Convert HDMI Plus
USB 2.0 Type-A to Type-B Cable
5VDC Power Adapter
Mini DIN-8 to RS-232/DIN-8 Cable
L-Bracket
Input/Output
Video Inputs | 1x HDMI (2.0) Female |
Video Outputs | 1x HDMI (2.0) Female (Loop Output) |
Other I/O | 1x RJ45 LAN, NDI, PoE Input/Output |
Expansion Slots | No |
Input Video Format | HDMI (8-Bit 4:2:0) |
Output Video Format | HDMI (8-Bit 4:2:2) |
Embedded Audio | : 8-Channel |
Standards
HDCP Support | No |
EDID Support | Manual Control |
HDR Support | Not Specified by Manufacturer |
Hardware
Media Card Reader | 1x SD (Unspecified Type) |
OS Compatibility | Windows 7 to 10 |
Power
Power I/O | 1x USB-B (5 VDC at 2.1 A) Input |
PoE Support | PoE 802.3af |
Power Consumption | Device: 5 VDC at 2 A (10 W) |
Environmental
Operating Temperature | 32 to 113°F / 0 to 45°C |
Storage Temperature | -4 to 158°F / -20 to 70°C |
Operating Humidity | 5 to 90% () |
General
Dimensions | 4.65 x 2.64 x 0.91" / 11.8 x 6.7 x 2.3 cm |