Rode VideoMic Pro+
The VideoMic Pro+ is a premium on-camera microphone for capturing broadcast-quality audio in a wide variety of movie scenarios. With a comprehensive feature set and superior sound quality, this is the go-to microphone for countless creators, offering ultimate performance and versatility.
Most important features:
Premium on-camera condenser microphone
Supercardioid polar pattern and extended frequency response to capture warm, directional audio
High-pass filter, high-frequency boost and three-stage gain control
Automatic switch-on function, safety channel
Flexible power options via included rechargeable battery, AA batteries or USB
Integrated Rycote® Lyre® shock mount for superior handling noise isolation
Optimized windshield for exceptional wind noise reduction
Rode VideoMic Pro+
Micro USB Cable
3.5mm TRS Cable
Microphone
Form Factor | Stand/Tree Mount |
Sound Field | Mono |
Operating Principle | Line Gradient |
Capsule | Electret Condenser |
diaphragm | 0.55" / 13.97mm |
Polar Pattern | supercardioid |
Orientation | End Address |
circuitry | Solid State (JFET) |
Path | none |
High Pass Filter | 75Hz |
Tone Adjustment | High Boost: |
Gain Adjustment | -10dB to +20dB |
Indicators | 1 x Single LED (Power, Status) |
On Board Controls | Gain/Sensitivity, High-Pass Filter, HF, On/Off |
windscreen | Foam (Included) |
Performance
Frequency Range | 20Hz to 20kHz |
Max SPL | 133 dB SPL |
Off-Axis Rejection | 5dB at 60° |
Impedance | 200 Ohms |
Sensitivity | -33.6 dBV/Pa at 1 kHz |
Output Level | 7.6dBu (Max) |
Dynamic Range | 118.8 dB |
Signal-to-Noise Ratio | 79.8 dB |
Equivalent Noise Level | 14 dB A-Weighted |
Connectivity
Output Connectors (Analog) | 1 x 1/8" / 3.5mm TRS |
Headphone Connector | none |
Number of Conductors | 2 |
power
Operating Voltage | Not Specified by Manufacturer |
Operating Current Consumption | 12mA (Battery Power) |
Battery Type | 1 x Red LB-1 |
Battery Chemistry | Lithium-Ion |
Approximate Battery Life | 100 Hours |
Physical
color | black |
mounting | Camera/Shoe Mount, Shock Mount (via Integrated Hardware) |
Mounting Thread Size | 3/8"-16 Female |
Included Case | none |
Dimensions | ø: 4.37 x L: 6.69" / ø: 111 x L: 169.93 mm |
weight | 4.3oz / 122g |
