085 130 5392
Scherpe offertes
Meedenkers en Oplossers
Maatwerk en Service
TerugHomeMerkenLiveUKramer DTAxrC2-OUT2-F34 -2–Channel 4K HDR HDMI over HDBaseT Output Card with Analog Audio & PoE Provider
Kramer DTAxrC2-OUT2-F34 -2–Channel 4K HDR HDMI over HDBaseT Output Card with Analog Audio & PoE Provider
Toon alle:
Matrix Switchers
Op werkdagen voor 17.00 besteld, zelfde dag verzonden! Mits voorradig
Gratis verzending vanaf € 75,-
085 130 5392
Scherpe offertes
Meedenkers en Oplossers
Maatwerk en Service
Beschrijving
DTAxrC2−OUT2−F34 is a two−channel, 4K@60Hz (4:4:4), CSC, HDMI, analog audio, bidirectional RS−232, Ethernet, & IR over HDBaseT twisted pair transmitter card for compatible Kramer Modular Multi−Format Digital Matrix Switchers. DTAxrC2−OUT2−F34 outputs two extended−reach HDBaseT signals with selectable embedded/de–embedded analog audio, bidirectional RS−232, IR, and Ethernet from the chassis to the line.
- Max. Data Rate — 18Gbps (6Gbps per graphics channel), 10Gbps CSC over CAT cable.
- Max. Resolution — 4K@60Hz (4:4:4).
- Analog Audio Embedding/De–embedding or ARC — On the same jack.
- HDBaseT Technology — HDTV compatible, HDCP 2.2/1.4 compliant.
- System Range — Up to 100m at normal mode (4K), up to 130m (430ft) at normal mode (2K), up to 180m (590ft) ultra mode (1080p @60Hz @24bpp). Note: When using Kramer HDBaseT cables.
- Ethernet Extension — Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control.
- Bidirectional RS–232 Extension: — Serial interface data flows in both directions, allowing data transmission and device control.
- Bidirectional Infrared Extension: — IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.
- 3D Pass–Through.
- PoE (Power over Ethernet) Enabled — Provides PoE power to a connected device with the Kramer PoE Power Supply Add–On PS–4812 (sold separately).
Technische specificaties
- 2 HDBaseT: On RJ–45 connectors
- 2 Unbalanced Audio: On a 6–pin terminal block connector
- 2 RS-232: On a 6–pin terminal block connector
- 2 IR: On a 4–pin terminal block
- 1 Ethernet: On an RJ–45 connector
- Standard Compression: Up to 100m (330ft) at 4K@60Hz (4:4:4), 4K@60Hz (4:2:0) or 4K@30Hz (4:4:4)
- Up to 180m (590ft) at full HD (1080p @60Hz 24bpp)
- High Compression: Up to 100m (330ft) at 4K@60Hz (4:4:4), or 4K@60Hz (4:2:0)
- Up to 180m (590ft) at 4K@30Hz (4:4:4)
- Up to 200m (650ft) at full HD (1080p @60Hz 24bpp)
- No Compression: Up to 100m (330ft) at 4K@60Hz (4:2:0)
- Up to 180m (590ft) at full HD (1080p @60Hz 24bpp)
- Standards Compliance: HDBaseT 1.0
- Note: When using recommended Kramer cables
- Max Data Rate: Up to 18Gbps (6Gbps per graphic channel), 10Gbps CSC over CAT cable
- Standard Compression Max Resolution: 4096x2160@60Hz (4:4:4) 24bpp
- High Compression Max Resolution: 3840x2160@60Hz (4:4:4) 24bpp
- No-Compression Max Resolution: 4096x2160@60Hz (4:2:0) 24bpp
- Compliance: HDCP 2.2, HDR 10
- HDMI Support: Deep color, x.v.Color™, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS–HD, 2K, 4K, and 3D as specified in HDMI 2.0
- Bandwidth: Up to 100Mbps
- Baud Rate: 300 to 115200
- Consumption: 21.5W
- Operating Temperature: 0° to +40°C (32° to 104°F)
- Storage Temperature: –40° to +70°C (–40° to 158°F)
- Humidity: 10% to 90%, RHL non–condensing
- Safety: CE
- Environmental: Complies with appropriate requirements of RoHs and WEEE
- 25.00cm x 13.00cm x 2.00cm (9.84" x 5.12" x 0.79" ) W, D, H
- 0.3kg (0.7lbs) approx.
- 29.30cm x 16.50cm x 5.90cm (11.54" x 6.50" x 2.32" ) W, D, H
- 0.5kg (1.1lbs) approx.
OUTPUTS
PORTS
EXTENSION LINE
VIDEO
EXTENDED ETHERNET
EXTENDED RS-232
POWER
ENVIRONMENTAL CONDITIONS
REGULATORY COMPLIANCE (STANDARDS COMPLIANCE)
PRODUCT DIMENSIONS
PRODUCT WEIGHT
SHIPPING DIMENSIONS
SHIPPING WEIGHT