INOGENI SHARE 2 Remote
Mix two channels of HD video over USB or HDMI and capture them with the INOGENI SHARE 2U USB/HDMI Mixer and Capture Device. Dual USB inputs and single HDMI input are available (only two can be used simultaneously). 1080p30 uncompressed video is accepted over HDMI, MJPEG and H.264 video formats from POV and webcams are supported via USB.
The built-in video mixer can show one input or the other, or display both inputs in side-by-side, big and small, and picture-in-picture configurations. All video processing is done using hardware, so video quality remains high latency is minimal. The advantage to using a mixer like the SHARE 2U is the ability to show more than one video input on teleconferencing software such as Skype, Zoom, Webex, and GoToMeeting with one-touch controls. Unique to the SHARE 2U is the incorporation of an HDMI mixed output in addition to the USB connection. With this connection, you can send mixed feeds to your computer for recording or teleconferencing, while simultaneously sending video to a projector or monitor. Control over the device can be taken using the host PC, or remotely via RS-232 and Ethernet
.
OEM and System Developer Friendly
The device may be controlled by INOGENI's app or via an included API so you can design your own. You can read the sources status, presence, format, modify the EDID, update the firmware, and ask for custom functionalities. You can also get Crestron modules to control the device using the LAN or serial interface.
General Features
Mixer feature: Hardware mixer into a single USB 3.0 interface
Control interface: LAN, RS-232, USB
Local and remote keypad
USB 2.0 cameras and HDMI capture
HDMI output for preview
Line level stereo audio support
Digital Fluid technology: Internal frame buffers maximize frame rate with any host
Hardware-based color space and sampling conversion
Compatible with Windows, OS X, Linux, and Android
Input
Video Inputs | 2 x USB 2.0 Type-A |
Frame Rates | Up to 60 fps, all formats |
Color Space | RGB, YCbCr, 4:4:4, and 4:2:2 (USB only supports RGB) |
Sampling Rate | 165 MHz |
Analog Audio Input | Analog stereo, line level, 3.5 mm jack |
Analog Audio Output | Analog stereo, line level, 3.5 mm jack |
Remote Control | 1 x Phoenix, RS-232 |
Mixer | The Mixer feature can be controlled by the following interfaces: panel control buttons, RS-232, optional INOGENI REMOTE, or HID (Human Interface Device) via USB connection |
Output
Connector | 1 x USB 3.0 Type-B |
Color Space | YCbCr (YUY2) 4:2:2 8-bit |
Video Scaler | Automatic hardware based |
Color Space Conversion | Automatic hardware based |
Sampling Conversion | Automatic hardware based |
Frame Rate Conversion | Automatic hardware based |
Audio Input | 2-channel LPCM 48 kHz audio from line input or embedded in USB or HDMI |
Audio Output | 2-channel LPCM 48 kHz audio line level |
USB Expansion | 2 x extra USB 3.0 ports for expansion purposes (The devices connected will appear to the host) |
USB Bandwidth | No USB bandwidth limitation |
General
Operating Systems | No driver installation required |
Host Requirements | USB 3.0 port |
Motherboard | Compatible with all motherboards |
Software Compatibility | UVC-compliant; runs with all software compatible to DirectShow, AVFoundation, and V4L2 |
Power | 12 V, 700 mA |
Operating Temperature | 32 to 113°F / 0 to 45°C) |
Storage Temperature | -40 to 221°F / -40 to 105°C) |
Relative Humidity | 0 to 90% non-condensing |
Dimensions | 7.3 x 4.4 x 1.2" / 18.5 x 11.2 x 3 cm |
Weight | 1 lb / 466 g |