Decimator Design MD-QUAD - Quad-Split MultiViewer

This multi-viewer can also be used as an input multiplexer. It is used to display up to 16 3G-/HD-/SD-SDI input signals on a single screen. The various menu items can be accessed via a rotary knob on the side. There are many ways to enable resp. disable overlays and customize the view to your needs.

• Support for 3G level A and level B on the inputs and outputs

• Allowing conversion between 3G-SDI level A and level B

• Simultaneous outputting of the signals on the SDI and the HDMI output

• Deployable as 3G-/HD-/SD-SDI 1 to 4 channel Multi-Viewer or 4 to 1 input multiplexer

• Customizable layouts with various standard layouts

• 16 Character UMD (Under Monitor Display) overlay per window (enable/disable, custom positioning and size)

• 8 Channel Audio Metering overlay per window (enable/disable, custom positioning and size)

• Load and restore custom layouts

• Fast switching between inputs using full-screen scaling

• Selectable output format in both full-screen and multi-viewer mode

• Low latency buffering for each input allowing non-synchronous inputs

• Support for 4 video formats with automatic detection of input signals

• Each window is independent of the others, allowing any 3G-/HD-/SD-SDI signal format of any frame rate to be displayed simultaneously

• Variable aspect ratios per window

• Horizontal and/or vertical image flipping per window

• Pass-Through mode allowing any of the 4 inputs to be selected and routed to the 3G-/HD-/SD-SDI or the HDMI output

• USB port for control and firmware updates

• Selection of various menu items via a rotary knob on the side

• Tallies can be applied to either tally boxes (default), outside Safe Action Area or border

• Tally boxes allow up to 4 tallies per window (green, red, blue and yellow)